Wenzhou Sundoo Instruments Co., Ltd. measuring instruments, gauges, force gauges, spring testers, gauging tools, measurement tools, meters, measuring stands

SN Series SKN series SH Series ST Series SD Series Test Stand Digital Microscope LX Series Clamps

Home>>

SPV Manual Test Stand Hydraudic(10-50k)

Function

SPV Manual Hydraulic Test Stand is designed for SH series of SH-10k~SH-50K force gauge. The Test Stand is applied with manual hydraulic jack for large load mechanical measurement. The operation is simply and stable. The test stand is combinated to multifunctional compressive & tensile test stand with different clamp.

	Capacity:50KN
	Stroke:140mm
	Dimension : L:260W:470H:1290		The force gauge is optional
	Net weight :140kg

Attention: When you fix the sensor and jack, please fix the them on the center of the load platform. The direction of the force,            which is measured, is on the center line of the test stand.
Precaution: 1.During the fracture test, please wear the protective mask and glove. That will prevent the danger from the               scattering piece in the testing.
            2.Do not use the damaged or warped clamp.The damaged or warped clamp may be off or rupture. The tested material will               fall. Be great careful, to avoid hurt your body.
            3.Do not bring the load excess the capacity of sensor. The sensor will be damaged with excessive load. Excessive load               will load will bread sensor and cause accident.

Outline

Specification

Specification&parameter of SH series digital push pull force gauge:

Model：	SH-10K	SH-20K	SH-50K
Capacity：	10KN	20KN	50KN
Min load：	0.005KN	0.01KN	0.01KN
Value error：	±0.5%

浙制03020220号