Wenzhou Sundoo Instruments Co., Ltd. measuring instruments, gauges, force gauges, spring testers, gauging tools, measurement tools, meters, measuring stands

SN Series SKN series SH Series ST Series SD Series Test Stand Digital Microscope LX Series Clamps

Home>>

SH Series Digital Push Pull Gauge

Function

Inside Sensior

Outside Sensor

The SH series has its own characters, with facility, high resolution, which can be used not only for simple measurement of tension/compression force but also used for various testing purpose; such as switch test, connector insertion/withdraw test, and fracture test, is efficient push pull testing equipment in a new generation.

Character

	High accuracy & High resolution The series have achieved extremely high accuracy; such as + 0.5%FS accuracy. And also,the SH series performance extremely high resolution. For example, the 50N capable device can indicate minimum 0.01N. It means 1/5000 resolution.

	Peak hold Hold the peak value in test;

	Peak hold and clean automatically Hold the peak value, keep the value in 1-10 seconds (time is selected);

	Auto power off The gauge will power off in 1-60 minutes ( time is selected), there is not operation;

	Comparative function Setting the upper limit and lower limit, the pilot lamp and buzzer to choose the eligible value;

	Calculate the average value Memory 10 data and calculate the average of memory data;

	Three units lbf, kgf, and Newton units are push-button selectable;

	RS-232 series port digital output The RS-232 series port output to printer. The printing data have max value, min value, average value, eligible value and incompetent value.

The inner and outside package showed in the photoes:

Specification

Model：	SH-2	SH-5	SH-10	SH-20	SH-50	SH-100	SH-200	SH-500
Capacity：	2N	5N	10N	20N	50N	100N	200N	500N
Min load：	0.001N	0.001N	0.005N	0.01N	0.01N	0.05N	0.1N	0.1N
Sensor conformation：	Sensor Inside
Value error：	±0.5%

Model：	SH-1k	SH-2k	SH-5k	SH-10k	SH-20k	Sh-50k	SH-100k	SH-200k	SH-500k
Capacity：	1k	2k	5k	10k	20k	50k	100k	200k	500N
Min load：	0.5N	1N	1N	0.005kN	0.01kN	0.01kN	0.05kN	0.1kN	0.1kN
Sensor conformation：	Sensor Outside
Value error：	±0.5%							±1%

Outline

Test Stand


Model: SLJ		Model: SJH-500		Model: SPJ		Model: SPV-5		Model: SPV-20

浙制03020220号